Creative BioMart to Present at
                        BIO-Europe Spring Creative BioMart to Present at AACR Annual Meeting|Apr. 5-10, 2024|Booth #2953

Human Interleukin 32, IL32 ELISA Kit

Cat.No. : CKERS-IL32-141H
  • Specification
  • Gene Information
  • Related Products
Prod. No. : CKERS-IL32-141H
Pkg.Size : 96T
INTENDED USE : This assay is a sandwich Enzyme Linked-Immuno-Sorbent Assay (ELISA). It is developed for quantitative measurement of Human IL32 in serum, plasma and other biological fluids.
PRINCIPLE OF THE TEST : An antibody specific for Human IL32 is coated onto the wells of the microtiter plate. Samples and standards of Human IL32 are pipetted into the wells for binding to the coated antibody. After washing procedure to remove unbound compounds, an enzyme-linked antibody specific for Human IL32 is added to the wells. Following a wash to remove any unbound antibody-enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of Human IL32 bound in the initial step. The color development is stopped and the intensity of the color is measured. The magnitude of the absorbance for this developed color is proportional to the amount of Human IL32.
SPECIFICITY&SENSITIVITY : Specificity:This assay recognizes Human IL32. No significant cross-reactivity or interference was observed. Detection Rage:7.8-500 pg/ml.Detection Limit: The minimum detectable dose of Human IL32 is typically less than 4 pg/mL.
REAGENTS AND MATERIALS PROVIDED : Human IL32 Microplate: polystyrene microplate coated with a monoclonal antibody against Human IL32;Standard (freeze dried): 500 pg/ml, 2 vials;Standard or Sample Diluent: 16ml, 1 vials; Biotin-antibody (100×): 60ul, 2 vials;Biotin-antibody Diluent: 16ml, 1 vials; HRP-avidin (100×): 60ul, 2 vials; HRP-avidin Diluent: 16ml, 1 vials; TMB Substrate: 12ml, 1 vials; TMB Stop Solution: 12ml, 1 vials; Wash Buffer (20×): 25ml, 1 vials; Microtiter plate sealers
MATERIALS REQUIRED BUT NOT SUPPLIED : 1. Validated microplate reader.2. Eppendorf Tubes for dilution for samples and standards.3. Deionized or distilled water.4. Validated adjustable micropipettes, single and multi-channel.5. Automatic microtiter plate washer or manual vacuum aspiration equipment.6. 37°C incubator.
STORAGE : Unopened Kit: Store at 2 - 8°C. Do not use past kit expiration date.Opened/Reconstituted Reagents: Standard or Sample Diluent; Biotin-antibody Diluent; HRP-avidin Diluent; TMB Substrate; Wash Buffer; TMB Stop Solution. The above mentioned reagents should be stored for up to 1 month at 2 - 8°C.Microplate Wells: Return unused wells to the foil pouch containing the desiccant pack, reseal along entire edge of zip-seal. May be stored for up to 1 month at 2 - 8°C.
RECONSTITUTION AND STORAGE : Sample: Centrifuge the serum, plasma or cell culture supernatant samples for 10 minutes at 1,000×g. Remove particulates and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.Standard: Centrifuge the standard vial at 6,000-10,000rpm for 30s. Reconstitute the Standard with 1.0 ml of standard or Sample Diluent. The undiluted standard serves as the high standard (500 pg/ml). The Sample Diluent serves as the zero standard (0 pg/ml). Prepare fresh for each assay. Prepare within 2 hours of use. Biotin-antibody: Centrifuge the vial before opening. Dilute to the working concentration using Biotin-antibody Diluent(1:100), respectively. Prepare within 1 hour of use. HRP-avidin: Centrifuge the vial before opening. Dilute to the working concentration using HRP-avidin Diluent(1:100), respectively. Prepare within 1 hour of use. Wash Buffer: If crystals have formed in the concentrate, warm up to room temperature and mix gently until the crystals have completely dissolved. Dilute 20× Wash Buffer Concentrate into deionized or distilled water.
PRECAUTIONS : 1. The kit should be equilibrated to room temperature (20-23°C) before opening any vials and starting the assay. It is highly recomnmended that the solutions be used as soon as possible after rehydration. 2. When mixing or reconstituting protein solutions, always avoid foaming.3. Do not mix or substitute reagents with those from other lots or sources.4. To avoid cross-contamination, change pipette tips between additions of each standard level, between sample additions, and between reagent additions. Also, use separate reservoirs for each reagent.5. Crystals could appear in the 20X wash solution due to high salt concentration in the stock solutions. Crystals are readily dissolved at room temperature or at 37°C before dilution of the buffer solutions.6. Keep TMB Substrate protected from light.7. The Stop Solution provided with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
ELISA PROTOCOL : 1. Prepare all reagents, working standards, and samples as directed in the previous sections. Dilute original density Standard as follow: Set up 7 points of diluted standard such as500 pg/ml, 250 pg/ml, 125 pg/ml, 62.5 pg/ml, 31.25 pg/ml, 15.625 pg/ml and 7.8 pg/ml. The last EP tubes with Sample Diluent is the blank as 0 pg/ml.2. Add 100µl of Standard, Control or Sample per well. Cover with the Microtiter plate sealers. Incubate for 1.5 hours at 37°C. 3. Aspirate each well and wash, Wash by filling each well with 1 x Wash Buffer using a squirt bottle, multi-channel pipette, manifold dispenser or autowasher. Complete removal of liquid at each step is essential to good performance. Repeating the process twice for a total of four washes. After the last wash, remove any remaining 1× Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.4. Add 100µl of Biotin-antibody working solution to each well. Cover with the Microtiter plate sealers. Incubate for 1 hour at 37°C. Biotin-antibody working solution may appear cloudy. Warm to room temperature and mix gently until solution appears uniform. 5. Repeat the Aspirate/Wash four times.6. Add 100µl of HRP-avidin working solution to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 0.5 hours at 37°C. 7. Repeat the Aspirate/Wash four times.8. Add 100ul TMB Substrate to each well. Mix gently, protected from light and incubates at 37°C for 10-20 min. 9. Add one drop (100 µl) of TMB Stop Solution to each well to stop the color reaction. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. 10. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm.
CALCULATION : Average the duplicate readings for each standard, control, and samples and subtract the average zero standard optical density. Plot the optical density for the standards versus the concentration of the standards and draw the best curve. The data can be linearized by using log/log paper and regression analysis may be applied to the log transformation. To determine the sample concentration of each sample, first find the absorbance value on the y-axis and extend a horizontal line to the standard curve. At the point of intersection, extend a vertical line to the x-axis and read the corresponding sample concentration. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
Gene Name : IL32 interleukin 32 [ Homo sapiens ]
Official Symbol : IL32
Synonyms : IL32; interleukin 32; NK4; TAIF; TAIFa; TAIFb; TAIFc; IL-32beta; IL-32alpha; IL-32delta; IL-32gamma; TAIFd; natural killer cells protein 4; natural killer cell transcript 4; tumor necrosis factor alpha-inducing factor
Gene ID : 9235
mRNA Refseq : NM_001012631
Protein Refseq : NP_001012649
MIM : 606001
UniProt ID : P24001
Chromosome Location : 16p13.3
Function : cytokine activity

For Research Use Only. Not intended for any clinical use. No products from Creative BioMart may be resold, modified for resale or used to manufacture commercial products without prior written approval from Creative BioMart.

Inquiry

  • Q&As
  • Reviews

Q&As (6)

Ask a question
Can recombinant IL32 be used to treat autoimmune diseases? 12/06/2022

At present, research is ongoing, and IL32 is considered to have the potential to treat autoimmune diseases, but further clinical validation is required.

What is IL32? 05/21/2022

IL32, a protein of human origin, is an interferon-induced cytokine with a variety of biological functions.

What is the progress of IL32 in clinical trials? 04/09/2022

IL32 is in clinical trials and will take time to evaluate its safety and efficacy.

Is recombinant IL32 associated with inflammation? 12/19/2021

IL32 induce and regulate inflammatory response and participate in immune and inflammatory processes.

Can IL32 improve immunity? 06/28/2019

Can enhance the activity and function of immune cells, thereby improving the body immunity.

What are the side effects of IL32? 01/11/2019

So far, there have been no clear reports of side effects of IL32, but attention should be paid to reasonable dosage and method of use when using it.

Customer Reviews (3)

Write a review
Reviews
12/13/2022

    IL32 protein has a long shelf life, which facilitates the continuity of subsequent experiments.

    05/20/2022

      Consistent results can be obtained using IL32 experiments and experimental uncertainty can be reduced.

      10/26/2019

        The IL32 shows excellent stability and repeatability under specific experimental conditions.

        Ask a Question for All IL32 Products

        Required fields are marked with *

        My Review for All IL32 Products

        Required fields are marked with *

        0

        Inquiry Basket

        cartIcon
        logo

        FOLLOW US

        Terms and Conditions        Privacy Policy

        Copyright © 2024 Creative BioMart. All Rights Reserved.

        Contact Us

        • /

        Stay Updated on the Latest Bioscience Trends